1. Aiper Scuba SE (2024) for flat above-ground floors
Aiper Scuba SE (2024, Silver) Aiper Scuba SE (2024, Silver)
Our verdict:
Smaller flat-floor pools
A cordless option for routine debris on a compatible flat above-ground pool floor.
View on Amazon- Catalog limit: up to 860 sq ft
- Published runtime: up to 90 minutes
- Cordless floor-cleaning design
Keep in mind: Flat floors only. Wall brushing and water treatment remain separate tasks.
The Scuba SE is the simple pick in this group. It is a cordless floor cleaner for above-ground pools. It does one job and asks for little setup.
Choose it if your pool has a flat bottom and the dirt sits on the floor. Skip it if you need wall or waterline cleaning. The maker's Scuba SE page lists floor coverage only.
What the specifications say
The listing title calls this the 2024 Scuba SE. It names a 1200 GPH suction rating, a 90-minute runtime and pools up to 860 square feet. GPH means gallons per hour. The rating is a motor figure, not flow measured in your pool.
The maker's US SE page describes a flat-floor cleaner with the same published size and runtime bounds. That does not establish every package detail for the silver 2024 listing. Check the exact model and included parts before choosing.
The catalog and maker use different wording for parking. We do not assign a precise stopping location to this listing. Retrieval and filter care still remain with the owner.
Where it fits
This cleaner fits a common backyard setup. Picture a round or oval above-ground pool with a vinyl liner. The floor is flat. The main mess is grass clippings, pollen clumps and small leaves that sink.
It also fits a buyer who dislikes cords. A cordless unit has no cable to coil, tangle or trip over. You carry it to the pool, switch it on and lower it in. That is the whole routine.
It suits a buyer who wants few settings. The maker describes one-click activation. There is no mode menu to learn. That matters for a household where several people will start the cleaner.
The audio alerts are a small plus for this buyer. The maker page lists alerts for low battery, impeller obstruction and water damage. An impeller is the spinning part that moves water through the unit. An obstruction alert means something may be jammed in it.
Job boundaries
The first boundary is surfaces. The maker page lists floor coverage only. Walls and the waterline are not part of the stated job. Scum lines and dirt at the water edge stay on you.
The second boundary is pool shape. The listing says the unit is meant for flat pools. A floor with a deep slope, a hopper or a large step area is outside the stated use. A hopper is a floor that dips toward a drain.
The third boundary is size. The 860 square foot figure is a ceiling, not a promise. A stated runtime is not proof of full coverage. Random paths can leave patches even when the battery lasts.
The fourth boundary is water care. A floor robot filters and removes debris. It does not sanitize water. It does not kill algae. Your chemistry routine stays exactly as it was.
Care burden
The care work is small but real. You empty the filter box after a run. A 2 liter box fills fast after a storm or a heavy leaf drop. Check the maker manual for how to rinse the filter and dry the unit.
You must also keep the battery charged. The maker lists a three-hour charge. If you forget, the next run starts short. Many owners tie charging to a fixed day to avoid this.
The listing mentions fast water release, which drains stored water from the body. The listing says 90 percent in 15 seconds. The maker page text says 80 percent in 15 seconds. Treat both as rough, and expect to tip and drain it as the manual directs.
Version and listing cautions
Keep the exact version in mind. The listing is for the 2024 Scuba SE in silver. We did not establish that it matches any newer SE. Do not assume parts, brushes or filters swap across versions.
The maker page itself has small inconsistencies. It shows 90 minutes in the spec table. Marketing text on the same page mentions 100 minutes. It shows 860 square feet in some places and 850 in another. Use the lower figures when you plan.
We also did not confirm current production of this exact variant. A catalog entry does not prove that. If you cannot find this listing, that does not mean the line is gone. It means you should check the maker page and the seller before you plan around it.
For a deeper look at this family, see our page on the Aiper Scuba SE.
2. Aiper Scuba S1 (2024) for walls and waterline work
Aiper Scuba S1 (2024) Aiper Scuba S1 (2024)
Our verdict:
Add wall and waterline work
Compare the listed vertical tasks only when the exact 2024 unit and pool structure are supported.
View on Amazon- Catalog lists floor, wall and waterline tasks
- 2024 catalog runtime: up to 150 minutes
- Catalog lists above-ground and in-ground use
Keep in mind: Not the current US upgrade. Do not transfer its 180-minute runtime, MicroMesh, app or shallow-area features. Exact supplied manual, filter and geometry fit need confirmation.
The Scuba S1 listing covers more surfaces than the SE. It names floor, wall and waterline cleaning. It also names a longer runtime and a larger pool limit.
This is the conditional pick. The extra reach is useful only if your pool lets a climbing robot work. Check the maker's Scuba S1 page and your pool manual before you decide.
What the specifications say
The listing title reads Aiper Scuba S1 (2024). It names a 150-minute runtime, wall and waterline cleaning, and pools up to 1600 square feet. It says the unit suits inground and above-ground pools.
The feature text names four modes. They are Auto, Wall, Waterline and Eco. A mode is a preset cleaning pattern. Wall mode and Waterline mode let you target one job instead of a full run.
The listing also names 11 sensors and a navigation system called Smart Wavepath Navigation 2.0. Sensors help the unit detect walls and obstacles. The listing says the system reduces overlap. We cannot confirm how well it does that in your pool.
The listing names tank-style tracks. These are belt-like treads, like those on a small tractor. They are meant to help the unit grip and cross uneven spots, slopes and drains. Grip on a wet liner is a different matter, and no spec settles it.
What the listing does not say
The listing we checked does not describe app control. It does not describe a fine mesh filter. It does not describe features for shallow platforms or sun shelves.
That matters for some pools. A shallow platform is a wide, low-depth ledge. Many robots struggle there because the water is too thin for climbing logic. If your pool has one, ask the maker before you buy.
Do not read the lack of an app as a flaw. Many floor and wall robots run with a button and no phone. It only means you cannot schedule runs or see a map from a phone, based on what we saw. Check the maker page for the exact control set.
Where it fits
This model fits a pool with a clear scum line. Sun lotion, pollen and oils collect at the water edge. A waterline mode targets that band. The SE cannot do this work at all.
It also fits a larger pool. A 1600 square foot limit gives more room than 860. A longer run helps with a pool that has corners or a long shape. Stated runtime is still not proof of full coverage.
It fits a buyer with vertical walls. Some inground pools have smooth plaster, tile or vinyl walls. A robot with wall climbing can scrub those. The result depends on wall material and pool shape.
It can also suit a buyer who wants one tool for the whole shell. You would not need a separate wall brush as often. You would still need to look at corners and steps by eye.
Above-ground cautions
The listing says the S1 suits above-ground pools. That wording is broad. It does not settle every above-ground case. Soft-sided pools have walls that flex, and some have a curved cove at the base.
Wall climbing on a thin liner needs care. The exact manual governs here. Look for statements about wall use on vinyl liners and soft walls. If the manual is silent, ask the maker in writing.
Pool depth also matters. A robot that climbs needs enough water to stay submerged at the waterline. A shallow pool can leave the unit partly out of the water. That is a poor fit for any underwater unit.
We did not confirm above-ground fit for specific pool brands or frame types. So do not assume it works on yours. Measure your wall height and note your liner type before you order.
Job boundaries
The S1 still does not sanitize water. A waterline brush removes film from the edge. It does not treat the water. Algae control and sanitizer levels remain your chemistry plan.
It does not skim the surface. Floating leaves and pollen sheets sit above the cleaner. A net or a skimmer robot handles those. The S1 mostly works under and along the water line.
It does not replace brushing in special spots. Steps, ladders, lights and corner seats often need a hand pass. The listing mentions drains and slopes, but it makes no promise on stairs.
Care burden
A wall climber has more wear points than a floor unit. Check the tracks and brushes for debris and hair after runs. The exact care steps are in the manual. Do not guess at disassembly.
The filter still needs emptying. We did not find a stated filter capacity or screen size in the listing. Look for both on the maker page. A fine screen catches more silt but clogs faster.
Charging is part of the routine. The listing gives no charge time. Check the maker page before you plan a daily schedule. A long runtime often goes with a long charge.
Retrieval also needs thought. A climber can stop on a wall or on the floor. You need a way to lift it out safely. Ask what the maker provides for that, and what the manual says.
Version and listing cautions
The listing is for the 2024 Scuba S1. The maker's current lineup also shows a Scuba S1 in its inground range. We did not confirm they are the same version. Do not assume the 2024 listing matches what the maker page shows today.
Keep it apart from other models too. This is not the S1 Pro. This is not a Scuba SE. Each has its own page and its own specs. Our page on the Aiper Scuba S1 keeps this version separate, and the S1 Pro page covers a different model.
Also note the year. A 2024 listing says nothing about 2026 changes. Features or software may have moved since. If a seller lists a different year, treat it as a different item until the maker says otherwise.
3. Aiper EcoSurfer S2 for floating leaves and surface debris
Aiper EcoSurfer S2 Aiper EcoSurfer S2
Our verdict:
App schedules and alerts
Compare app controls and the stated finer mesh when they help your surface-care routine.
View on Amazon- App schedules, steering and status functions
- 150-micron filtration; maker lists a 4-liter basket
- Current US maker package lists a DC charger
Keep in mind: Sufficient sunlight is a condition of continuous solar use. Dispenser hardware does not replace testing or water treatment. No measured capture advantage is claimed.
The EcoSurfer S2 is not a vacuum. It is a solar-powered skimmer robot. It floats on the surface and collects what sits there.
That makes it a different job from the other two. It does not clean the floor or the walls. Read the maker's EcoSurfer S2 page for current details.
What the specifications say
The listing title names 24/7 continuous cleaning, app support, dual charging modes and smart obstacle avoidance. It names 150 micron filtration, over-the-air updates, a leak-proof baffle and edge cleaning. Over-the-air updates mean the software changes by wireless download.
The listing says solar charging can keep it running when there is enough sunlight. On cloudy days, a charge by DC adapter can run it up to 35 hours. DC means direct current, the type a plug-in adapter supplies for this kind of device.
The maker documents a basket of about 4 liters and a 150 micron screen. That is finer than the 180 micron screen on the SE. Fine screens catch pollen and small bugs, but they also load up sooner.
The app features include start and stop, schedules, remote steering, progress tracking and history. They also include alerts when the unit is blocked. These S2 app functions concern surface skimming. They do not turn it into an underwater cleaning robot.
The listing mentions four retractable anti-stranding columns. They are meant to keep the unit from sitting on pool steps. Whether they clear every step shape is not established.
Where it fits
Picture a pool near a maple or oak tree. Leaves land on the surface every morning. A skimmer robot can pick them up before they sink. That cuts the floor work that follows.
It also fits a buyer who wants daily surface care without work. A schedule can run it while you are away. The unit does not need you to lower it in each time.
It fits a pool with a sunny open deck. Solar charging needs direct light. A pool that sits in shade most of the day will lean on the adapter.
It fits a household that already owns a floor robot. The two jobs do not overlap. The skimmer handles the top. The floor unit handles the bottom.
Solar versus adapter charging
Solar charging is conditional. A tree that shades the pool also drops leaves into it. That is the very pool that needs a skimmer. The same shade limits the solar panel.
Think about your sun hours. A pool with clear sky much of the day suits solar. A pool shaded by trees or a house wall will need adapter charging more often. The listing gives the 35-hour figure for a full adapter charge, not for real use.
Do not treat 24/7 as a promise. The listing words it as possible with enough sunlight. Real runtime depends on weather, angle and shade. Treat the 35 hour figure as a maker number, not your result.
The charging plan also affects retrieval. If the unit needs a plug-in charge, you must reach it. Think about where it will sit and how you will lift it out. The pool edge and the deck matter here.
The chlorine tablet holder
The listing mentions a holder for chlorine tablets. This is a feature of the device, not a cleaning step.
Treat it carefully. A skimmer that carries a tablet changes how chlorine enters the water. Dose rules, tablet type and safe handling belong to the manual and to the tablet label. We do not give a procedure here.
Also keep the roles clear. Filtering surface debris is not sanitizing water. The skimmer removes leaves and film. Your sanitizer program does the water treatment.
Job boundaries
This device skims. It does not vacuum sunk debris or scrub walls. Waterline scrubbing by a climbing robot is a separate job. The listing mentions edge cleaning, but that is not a wall or waterline scrub.
It handles only what floats. Leaves that already sank stay down. Fine silt on the floor stays too. You need a floor tool for that.
It does not cure green water, kill algae or balance pH. A filter screen catches particles, not dissolved or microscopic matter.
It also faces pool layout limits. Steps, ladders and corners can trap a floating unit. The anti-stranding columns and blocked alerts help. They do not remove the risk.
Care burden
Empty the basket often. A 4 liter basket can fill fast under trees. A full basket cuts what the unit can pick up. Check it daily in leaf season.
Rinse the screen as the manual directs. A 150 micron screen clogs on pollen and oils. Do not assume a quick shake is enough. Follow the maker's care steps.
Watch the app for blocked alerts. An alert tells you the unit is stuck. You still have to reach it and free it. Keep a pole or a hook nearby.
Software updates also come into play. The listing mentions over-the-air updates. An update needs a working phone link. That means home Wi-Fi reach at the pool.
Fit and cautions
Check the model name closely. This is the EcoSurfer S2. It is not the EcoSurfer S1. It is not any other brand's skimmer. Each has different specs.
It is also not an underwater Scuba cleaner. The names look alike, but the jobs differ. Do not mix up a Scuba page with the EcoSurfer page.
Pool type fit is not broadly established. We did not confirm use with every above-ground frame or liner. Look at the manual for pool size limits, water depth and edge shape. Our guide to the best robotic pool skimmer covers this tool type more widely.
Salt systems are another point. The listing mentions motors made to tolerate salt chlorine. We make no claim about how long they last. Check the manual for guidance on your water type.
Factors to consider when choosing Aiper pool cleaner
These three products do three different jobs. A shopper often thinks of them as a ladder, from basic to better. That is the wrong frame. Pick the job first, then the tool.
Start with where the dirt sits
Look at your pool after a windy day. Is the debris on top, on the walls or on the floor? The answer sorts the three products.
Floating leaves point to a skimmer. Dirt on a flat floor points to the SE. Film on walls and at the waterline points to the S1.
Many pools have all three. In that case, one device will not cover every job. Pick the one that addresses your biggest chore. Fill the rest with manual tools.
Pool surface and shape
Surface material changes how a robot grips. Vinyl, plaster, tile and fiberglass differ. The listing for the S1 does not tell us how it grips each one. The manual and maker should.
Shape matters as well. Round pools often suit random patterns. Rectangles with sharp corners can leave dirt in the corners. Free-form shapes with coves are harder.
Floor slope is a major factor. The SE listing says flat pools. A pool with a deep end that drops sharply is a poor match. A hopper or a bowl floor can stop a floor robot.
Stated area and runtime
The SE lists 860 square feet and 90 minutes. The S1 lists 1600 square feet and 150 minutes. These are maker figures. They come from controlled conditions.
A runtime does not prove full coverage. A robot may take long paths that overlap. It may miss a corner on every run. A bigger number only tells you the battery lasts longer.
Use the area figure as a ceiling. If your pool is near the limit, expect more misses. If it is well under the limit, you have more margin. Do not buy at the edge of the range.
Pool volume is a different measure. Area is the floor and wall surface. Volume is the water amount. A listing that gives square feet tells you nothing about gallons.
Filter screen and basket size
A smaller micron number means finer filtering. The EcoSurfer lists 150 microns. The SE lists 180 microns. The S1 listing gives no screen size that we found.
Fine is not always better. A finer screen clogs sooner. You would then empty or rinse it more often. A coarse screen lets fine silt through.
Think about the size of your debris. Big leaves fill a tray fast, whatever the screen. Pollen needs a fine screen. Sand and grit sit in between.
Capacity is the second half. The SE lists a 2 liter filter box. The EcoSurfer is documented with about a 4 liter basket. A larger container means fewer trips to empty it.
Charging, retrieval and storage
Cordless units need a charging spot. Pick a dry place with power close to where you will store the unit. The SE lists a three-hour charge. Check others on the maker page.
Retrieval is easy to overlook. A floor robot parks at the edge. A wall climber might finish anywhere. A skimmer floats and may drift. Think about how you will reach each one.
The SE includes a retrieval hook in the box. For the others, we did not confirm what ships with them. Look at the maker page for the box contents. Do not assume a hook is included.
Storage also matters. A cordless unit is lighter than a corded one with a long cable. You still need a dry spot and a way to drain it. The SE lists a water release feature for this.
Weight is a concern for lifting. We have no verified weight figures here, so check the maker pages. A heavy unit full of water can strain your back. Drain before you lift when the manual allows.
App support and alerts
The EcoSurfer lists app support for schedules and alerts. The SE lists audio alerts, not an app. The S1 listing we checked does not describe an app.
An app helps if you are away often. You can set a schedule and see history. You can see a blocked alert. It needs a phone link at the pool.
An audio alert helps if you are nearby. A beep tells you about low battery or a jam. It does little if you are inside the house. Think about where you will be.
None of the apps steer a robot under water. Remote steering applies to the surface skimmer only. Do not expect to drive a floor robot from your phone.
Trees and overhead cover
Trees shape the whole choice. Heavy leaf fall fills a filter box fast. It also shades a solar panel. That is a double hit for the EcoSurfer.
In a leaf-heavy yard, a surface tool pays off earlier. Catching leaves before they sink saves floor work. Our page on the best pool vacuum for leaves covers floor options.
In a tree-free yard, a floor robot alone may do enough. Pollen and dust still settle. A weekly run might keep the floor in good shape.
Seasonal leaf drops are a short burst. A net can handle that cheaply. A robot that sits idle most of the year is a poor use of money. Buy for your normal month, not your worst week.
Small pools and steps
A small pool changes things. A robot may spend more time turning than cleaning. It may bump the same wall again and again. The size limits on the listings do not set a minimum.
Steps and ladders are a problem for every type. A floor robot may climb a low step by accident. A skimmer may sit on a step. The EcoSurfer lists anti-stranding columns, and that is the only step feature in these listings.
If your pool has many steps, ask the maker. Ask how the cleaner handles them. A short email can save a return.
Also check the pool depth. A very shallow pool may not cover a robot. A shallow end is a problem for a unit that sinks. Read the manual for minimum depth.
Cables and power
Cordless units avoid cable tangles. They also avoid the need for a power outlet near the pool. That is a safety and storage gain, but it has a limit. You must still charge them.
The EcoSurfer's solar panel adds a different power path. It still offers an adapter. Use only the adapter in the box, and follow the manual. We do not give electrical steps here.
If you have a corded cleaner now, you know the cable chores. Coiling, untangling and storing take time. A cordless unit removes those. It adds battery care in return.
Never run a charger near wet hands or a wet deck. Follow the maker's instructions for where and how to charge. The manual governs electrical use.
Version and year listings
A listing year is part of the product name. The SE here is the 2024 version. The S1 is the 2024 version. A newer model with a similar name may differ in features and parts.
Do not carry a spec from one version to another. A filter, brush or battery may not swap. Check the exact model on your cleaner before you buy replacements.
Keep names straight. The EcoSurfer S2 is a skimmer. The Scuba line is under water. The maker's site also lists many newer models. We did not match these three listings to any of them.
If you see a different year at a seller, treat it as a different product. Ask the seller to match the model number. Then check the maker page.
Water care is separate
None of these devices sanitizes water. They filter and remove debris. That is not the same as killing germs or algae. Chemistry still decides water safety.
Removing debris does help water care. Less organic matter in the pool means less demand on sanitizer. That is a general benefit, not a measured result for any model here.
Follow your test kit, your pool manual and your sanitizer label. We give no dosing steps. A cleaner does not change those rules.
Pairing an Aiper pool cleaner with gear you already own
Many buyers already own a net, a pole and a manual vacuum. The question is what a robot adds. Often the answer is time, not a better result.
A robot saves the daily skim or the weekly vacuum. It does not do the corner work. It does not do the deep clean after a storm. You still use your old gear for those.
A floor robot plus a net
This pairing is the simplest. The net takes surface leaves each day. The SE takes the floor dirt each week. Together they cover two of the three layers.
The net also protects the robot. Fewer leaves reaching the floor means a slower-filling tray. That cuts how often you empty it. It also lowers the chance of a jam.
If you own a good net and use it, you may not need a skimmer robot. A net costs little and has no battery. The skimmer saves you the daily walk to the pool.
A floor robot plus a skimmer robot
This pairing covers top and bottom. It is the most hands-off way to use these products. It also adds two batteries to track.
It makes sense for a pool under trees. The skimmer grabs leaves on the surface. The floor unit picks up what sinks. Walls and waterline still need a hand pass.
Check pool space first. Two robots in a small pool can get in each other's way. A skimmer floats and a floor unit sits low, so they rarely collide. Still, think about retrieval for both.
A wall climber plus a net
If you choose the S1, a net is still useful. The S1 works under water. It does not skim. Leaves floating on top slip past it.
A wall climber can also reduce brushing. That is the main gain over the SE. Check the walls after runs to see if it holds up for your pool.
When to keep a manual vacuum
A manual vacuum stays useful. It handles big debris, heavy silt and one-time messes. It lets you aim at a spot. Our guide to the best handheld pool vacuum covers the small tools.
Keep your hose and head if your pump and filter already do the work. A robot does not use your pump. It has its own filter. That means your main filter sees less debris, but still runs.
If your pool has algae, a robot will not fix it. See our page on the best above-ground pool vacuum for algae for manual options. Algae is a chemistry problem first.
When another type fits better
If you want a very simple, cordless floor tool, our page on cordless robotic pool cleaners shows the wider field. It includes other brands. You can compare job and size there.
If you are also weighing another brand, our WYBOT versus Aiper page sets them side by side. Use it for a brand-level view, not for these exact versions. The model details still matter more.
If you prefer a pump-driven cleaner, a different type may fit. A suction-side cleaner runs from your pool's own pump. Our page on suction-side pool cleaners explains that type. It is a different cost and care path.
For a broader look at robots, start at the robotic pool cleaner guide. It lists the types in one place. Use it to check that a robot is the right tool at all.
How We Picked
We used exact catalog records and maker US pages checked October 16, 2026. The comparison is based on published specifications. We did not test cleaning results, battery life or reliability.
The three models represent different jobs. The silver Scuba SE and Scuba S1 listings are dated 2024. Their details stay separate from newer Scuba versions and the current EcoSurfer S2 surface skimmer.
A catalog entry does not confirm current maker production or every pool fit. Runtime and area figures are stated limits. They do not prove coverage. We compare the work each unit is meant to do, its care burden and the tasks left to the owner.
Our verdict on Aiper pool cleaner
An Aiper pool cleaner should match the cleaning job first. There is no single winner here. There are three jobs, and each product suits one. Match the job to the tool.
Choose the Scuba SE if you have a flat above-ground pool and the floor is the problem. It is the simplest cordless option in this group. It will not touch walls, the waterline or floating leaves.
Choose the Scuba S1 if walls and waterline matter and your pool suits a climbing robot. Confirm the fit first, especially for soft-sided above-ground pools. Verify the exact 2024 version before you order parts or accessories.
Choose the EcoSurfer S2 if floating leaves are your main chore and you get steady sun. Plan for adapter charging in shade. Expect to keep a floor tool as well.
Skip all three if your pool has a steep floor, a shallow platform you cannot clear, or a debris load far above the stated limits. Keep your current gear in that case. A robot is not a fix for chemistry problems.
If you can buy only one, pick by where your dirt sits most days. Do not pick by the biggest number on the page. A bigger runtime or area is not proof of better coverage.
Frequently asked questions
Does an Aiper pool cleaner sanitize my pool water?
No. These devices filter and remove debris. That is not sanitizing.
They do not kill algae or germs. Your sanitizer, test kit and pool manual still control water safety. Less debris can ease the load, but it does not replace your chemistry routine.
Can one Aiper pool cleaner handle floor, walls and floating leaves?
Not from the listings we checked. The Scuba SE covers floors. The Scuba S1 lists floor, wall and waterline work. The EcoSurfer S2 skims the surface. Covering all three layers takes more than one device, plus some hand work with a net or brush.
Is the 2024 Scuba SE the same as a newer Scuba SE?
We did not confirm that. The listing is for the 2024 version, and we did not match it to any later one. Parts, filters and features may differ across versions. Check the model name on your unit and the maker page before buying replacements.
Will the EcoSurfer S2 run all day on solar power?
Only with enough direct sun, per the listing. Shade, clouds and the angle of the panel all cut charging. The listing gives up to 35 hours from a full adapter charge. Treat that as a maker figure, not a promise for your yard.